The key to cleaning vinyl or acrylic tubs and showers is to remove dirt and grease without leaving behind a residue that can damage the finish and leave it looking dull. Start with half a gallon of hot water and mix in a quarter cup of vinegar, a quarter cup of rubbing alcohol and a couple of squirts of dish soap.
Can isopropyl alcohol damage acrylic?
The strength of Zeiss is 50% isopropyl alcohol, so it is not too extreme for any potential mirror coating on your acrylic. This is a nice go-to if you already have some in your home for cleaning eyeglasses.
What cleaners can be used on acrylic tubs?
Most store bought, non-abrasive and non-aerosol bathroom cleansers are safe to use, such as: Glass Plus, 409, Fantastik, Kaboom and Scrub Free. Remember: ALWAYS RINSE WITH CLEAN, WARM WATER IMMEDIATELY AFTER CLEANING.
Can alcohol be used on acrylic?
Don’t Clean Acrylic With Alcohol!! (Methyl, Ethyl, Isopropanol, or Even Acetone.)
How do you disinfect an acrylic tub?
Scatter baking soda or mild cleaning product throughout the tub and allow it to sit for 5-10 minutes. Baking soda can remove hard dirt from the acrylic. For tough stains: First, fill the tub with hot water and vinegar.
Can Lysol wipes be used on acrylic?
You can also use 3% Hydrogen Peroxide, Isopropyl Alcohol diluted to 30% strength or Lysol Brand with Hydrogen Peroxide Multi-Purpose Cleaner, Citrus Sparkle Zest to clean your acrylic sheet. Grease, oil, or tar may be removed with a good grade of hexane, aliphatic naphtha, or kerosene.
Is denatured alcohol safe on plastic?
Denatured alcohol (DA) is safe to use for the cleaning of most plastic, aluminum, stainless steel, nickel-plated, and anodized windshield repair injectors.
Does vinegar damage acrylic tubs?
Vinegar will not damage acrylic plastic. Next drain the tub and while the tub is still wet, sprinkle the grime all over with baking soda that is mildly abrasive.
Can Scrubbing Bubbles be used on acrylic tubs?
Cleaning Acrylic Tubs
Avoid cleansers and other solutions not approved for use with acrylic tubs, such as Scrubbing Bubbles, Goof Off, aerosol cleansers, paint removers and any type of thinners of acetones.
Is Bar Keepers Friend safe for acrylic tub?
When used properly, Bar Keepers Friend SHOULD be safe for your acrylic surfaces. However, you must follow the directions for use completely, up to and including rinsing thoroughly when finished.
What should you not use on an acrylic tub?
Don’t use solvents (turpentine, lacquer thinner, mineral spirits, paint thinner, MEK, xylene, acetone, naphtha, etc.) that can wreak havoc on an acrylic surface. With a little care and consideration, you can prevent damage to your acrylic shower or tub.
Is Magic Eraser safe on acrylic?
In general, if you have an acrylic tub, it’s best to use non-abrasive cleaners such as dish soap, Clorox wipes, or a mixture of vinegar and water. Do not try bleach or abrasive cleaners like steel wool on the tub. However, the Magic Eraser from Mr. Clean® is a safe option as long as you are gentle when scrubbing.
Is 409 safe for acrylic tubs?
409 All-Purpose Cleaner Spray
It also contains no abrasive chemicals, so it won’t cause any wear on the acrylic tub. It is perfect for general routine cleaning.